Honeycomb Truck Tires

Summary of four major causes of solid tire wear

Solid tire is the tire carcass without inflation, also do not need to fill liquid, sponge or other non solid materials with certain hardness and elasticity for the whole manufacturing completely made of rubber, tire, vehicle load bearing and walking. Because the solid tire is generally applicable to high load vehicles or mechanical equipment, the working environment is bad, so one of the common problems of solid tires is wear. The causes of solid tire wear are summed up in these four points:

First, when the tire is subjected to grease, acid and alkali corrosion and long time high temperature, the physical and chemical properties of the tire will change, the load capacity will be greatly reduced, and the tire will be easy to blow out in use. In addition, the oil corrosion of the tire will appear gas block spalling, a small area of rubber shedding of the tire, as well as the carcass cord and rubber separation phenomenon. Because the patch is not compatible with the oily rubber, even the damage to the tire is very small, and the possibility of repair is lost.

Two, in certain loading and inflation pressure, the increase of speed, frequency, deformation of the tire carcass and tire circumferential vibration and lateral distortion (stationary wave) increased, unit time internal friction and heat generated increases, the decline in the performance of the tire, and even ply rupture and tread spalling accelerate the tire wear and damage.

Three, due to differences in characteristics of front and rear axle load distribution is different, the driving wheel and the steering wheel and different road conditions, the wear condition of the tire is not consistent, if both sides of the same axle without replacement of the same plant, the same size, structure, level and pattern of the tire, the tire wear will accelerate.

In four, the tire pressure, tire overloading the flexural deformation increases, stress increases cord and cord, easilycausing sidewall cord broken, loose and ply delamination, cord force will exceed the allowable design stress and tire ground pressure, heat generated increases the matrix, temperature, bearing capacity decline. At the same time, because of the contact between the shoulder and the ground, especially when the obstacle is encountered, even a small stone will cause the crown blasting. The practice proves that when the tire load exceeds 20%, the mileage will be shortened by 35%; when the tire load exceeds 80%, the distance will be shortened by more than 59%; when the tire load exceeds 50%, it will be shortened by more than聽

In addition, the road condition has a great influence on the service life of the solid tire, which affects the friction of the tire and the ground and the dynamic load of the tire.

Product characteristics

1. This kind of tire will not have puncture or air leak

The honeycomb tires are designed with a honeycomb structure. Therefore, during the driving process, there is no need to worry about the car being over-filled and causing a puncture on some roads with poor road conditions, and there is no need to worry about air leakage. Therefore, the safety of driving the vehicle is greatly improved.

2. The tire is strong enough.

The tire's manufacturing performance is mainly based on sturdy and off-road performance, which allows the driver of the car to be as smooth and comfortable as the ground.

3. Anti-stab and has a good service life

Since the honeycomb tire removes the inflated portion of the conventional tire of the automobile, and the honeycomb structure is made of a very strong material, it is resistant to thorns and durable.

4.Various specifications can be chose, you can contact with customer service for details.