Skid Steer Loader Tyres

Skid steer loader tyrescharacteristics：

Good resistance to high temperature and low heat, so that the tire in a bad environment, there is still good safety.

Low compression deformation, high resilience characteristics of tire in the state remained under high load, good performance.

Low heat resistance, resistance to cutting material composition, in long distance, long time building, still has excellent load capacity

Applicable occasions

The nature of the operation; the heavy load, the long distance and the long time.

Extremely hostile workplaces, such as basic industries, port handling, glass and metal industries.

Economy:

Deep tread pattern design, greatly improve the use of tires, extend the use of time.

No tyre characteristics, exempt from fees and waste tire blowout, save cost.

Security:

The inner part of the carcass is fully filled with elastic glue, and no tread or blowout occurs in any place.

1~2 times higher than the pneumatic tyre safety load, increase safety coefficient of pile high work.

Pneumatic tyres are often unstable because of the pressure difference between the two sides of the tire, especially when working in the upper air or in the heavy load.

Solid tires, which have equal and identical gum coordination, can completely avoid the above situation, and can effectively increase the safety requirements in any case.

Application：

According to the use of occasions, using heavy machine, different working environment can be adjusted with a separate glioma, with the requirements of the use of.

Timeliness:

Skid steer loader tyres have higher load performance, can reduce the cross-sectional area of tire and contact surface, greatly reduce tire wear and increase vehicle flexibility, improve work efficiency.

Not characteristic of broken tire, can avoid the waste of idle time for tyre or tire vehicles and personnel, increase energy