Non Inflatable Tires

Description

Car tires are the most critical part of the vehicle's operation, which can alleviate the bumps of the vehicle on the road, and also better protect the vehicle's steel ring. If there is a problem with the tire, there will be cracking, puncture, or accidents while driving. Now the tires are basically inflated. If you encounter sharp objects, a puncture will occur. But this tire does not need to be inflated, and there is no need to worry about a puncture event. With non inflatable tires, the car may no longer have to worry about the car being out of control caused by the explosion of the car tire.

Recipe after the upgrade of the quality of non inflatable tires, with high amount of glue!

1. Inflatable tire size is currently generally in English as a unit, but the European countries are commonly used metric. The high-pressure tire is generally indicated by D × B, where d is the number of inches of the tire diameter and B is the number of inches of the tire section width. , 34 × 7 that the tire diameter D is 34 inches, section width B is 7 inches.

2. The car is usually used for low-pressure tire, its size marked with B - D, for example, 9.00--20, (B - D) that cross section width B is 9 inches, and the rim diameter d is 20 inches.

3. The low pressure tire in European countries is expressed in mm × D, in millimeters, for example, 185 × 400 tires, indicating that the cross-sectional width B is 185 mm and the rim diameter d is 400 mm. This specification of tires is equivalent to 7.50--16 tires.

4. In the ISO international standard, the car tire number is expressed as (section width) / (flat rate) (tire structure mark number) (for tire diameter) (load index) (speed mark). For example, the number 195 / 60R1485H tires, meaning as follows:

(1) 195 indicates that the tire cross-section width is 195 mm.

(2) 60 is expressed as a percentage of the flattening rate, i.e., the height ratio of the tire cross section is 60%.

(3) R represents the radial tire (in addition, D, B, respectively, said the ordinary bias tire and belt bias tire).

(4) 14 indicates that the rim diameter is 14 inches.

(5) 85 is the load index.

(6) H is the speed mark, the letter from B - U (except D, H, I, O outside) in order, the maximum speed from 50 - 200 km / h increments, each phase difference of 10 km / hour, special Ground, D maximum speed that 65 km / h, and h that the maximum speed of 210 km / h.